E130 Conference Room

This article will show how to navigate and control the conference room AV system.

Starting the conference room

1. Locate the touch panel and tap the screen to see the system power page.

2. Tap the Turn System On button.

System start page

3. Wait for system to finish booting.

Selecting a source

1. Tap one of the available sources located on the left of the touch panel.

Select a source

Note: The active source will appear different in color. Ex.. desktop is the selected source in the picture above.

Front wall jack:

front wall jack

Laptop is for VGA (analog) connections, for audio use the headphone jack with the VGA connection.

vga connectorheadphone audio connection

HDMI (Digital)

hdmi connection

Adjust room volume

1. On the right hand side of the touch panel is an up arrow (volume up), down arrow (volume down).

volume arrows

2. Mute the sound with the Mute button

mute button location

Projector Control


1. Tap Utility in the upper right hand corner of the touch panel.

Utility button location

2. This is where you can control the power on and off of the projector only.

Projector power on and power off

3. Tap Image Mute. This will blackout the projector, but the projector is still powered on.

Projector image mute button location

Shutdown the classroom

1. Tap Exit in the lower right hand corner to show the shutdown page.

Exit button location

2. Tap Turn System Off.

Shutdown page




Keywords:E130, conference, divide, combine,   Doc ID:100100
Owner:Paul V.Group:Fox Valley Technical College
Created:2020-04-06 10:08 CDTUpdated:2021-03-16 13:55 CDT
Sites:Fox Valley Technical College
Feedback:  0   0