Kaltura Capture for Faculty

This knowledge base article is for faculty in the use and operation of Kaltura video capture software.

Using Kaltura Capture Software For Faculty

Kaltura Capture can be used to record a video of your web camera, your screen, or both.  It will allow 

you to record a video of any length of time.  There are three steps you need to complete:

1.  Download the Kaltura Capture software if you are recording off-campus.

2.  Record and upload your video.

3.  Place your video in an assignment, discussion board, or other location in your course.


Downloading the Kaltura Capture Software (One Time on non-FVTC Computers)

This software is already installed on all FVTC computers. You only need to install the software on a home computer, if needed.

1.  From My Courses, click My Media.

IMG1.PNG

2.  Click Add New, Kaltura Capture.

IMG2.PNG

3.  The following page will be displayed.  Click the appropriate download button.

IMG3.PNG

After the software has been downloaded, you can record and upload your video.


Recording and Uploading Your Video

1.  From My Courses, click My Media.

IMG1a.PNG

2.  Click Add New, Kaltura Capture.

IMG2a.PNG

3.  Click Open URL:Kaltura-Pe...pture Protcol.

IMG3a.PNG

4.  The following software will appear.  (If you need to open your software, find and open Kaltura Capture.)

 IMG4a.PNG

5. Make sure the web camera and screen is setup correctly.  To turn off the camera, click the camera icon. 

IMG5a.PNG

6. Make sure the Audio is setup correctly.

IMG6a.PNG

7.  Select the correct screen, if needed.

IMG7a.PNG

8.  Click Select Area.

IMG8a.PNG

9.  Select the size you wish to record, then click Confirm.

IMG9a.PNG

10.  Click the Start Recording button to begin recording.  (The Start Recording button is the round red button.)

IMG10a.PNG

11.  The timer will count down and you will begin recording.  The following controls will appear in the lower right.

IMG11a.PNG

12.  Click Stop when you are done recording.

13.  The Kaltura Capture dialog box will appear.  Change the Title to be descriptive.  Click Save & Upload.

IMG12a.PNG

14.  The video will be uploaded.  Notice the progress bar.

IMG13a.PNG

15.  Once the video has been uploaded, a link will appear. 

IMG15a.PNG


Adding the Video to Your Course

You can add your video from My Media to your course.  It can be added to an announcement, in a 

discussion board, as an item in a content button, and even as feedback to a student.

1.  While editing an item click Mashups, Kaltura Media.

IMG1b.PNG

2. Select My Media, Media Gallery, or Shared Repository.

IMG2b.PNG

3.  Narrow your search using filters or the Search Media Field.

IMG3b.PNG

4.  When you have found the appropriate video, click Embed.

IMG4b.PNG

5.  The video will be inserted into your item.  When you are finished, click Submit.


Getting a Link from Your Video to Share

1.  From My Courses, click My Media.

a.PNG

2.  Click the title or video thumbnail.

b.PNG

3.  Hover over the video and click the Share button.

c.PNG

4. Click in the link field. Press Cntrl+C to copy link. 

d.PNG

5.  You can then paste the link where you need it in or out of Blackboard.







Keywords:kaltura, capture, video, record, web camera, screen kalturacapture   Doc ID:106739
Owner:Andrew H.Group:Fox Valley Technical College
Created:2020-10-20 09:40 CSTUpdated:2021-05-14 12:11 CST
Sites:Fox Valley Technical College
CleanURL:https://kb.fvtc.edu/kalturacapture
Feedback:  0   0